China Fuente de alimentación de conmutación de una sola salida de 60W Fabricantes

productos nuevos

Home > Lista de Producto > Fuente de alimentación conmutada > Fuente de alimentación de conmutación de una sola salida de 60W

Fuente de alimentación de conmutación de una sola salida de 60W

Información básica

Modelo: S-60

Descripción del producto

Especificaciones 1. Alta eficiencia, alta fiabilidad
2. Entrada de CA universal / rango completo
3. 100% prueba de quemado a plena carga

4. Protections: Short circuit / Over load / Over voltage
5. Cooling by free air convection
6. Fixed switching frequency at 50KHz
7. 2 years warranty
8. Dimensions: 159*97*38mm(L*W*H)

Specification:

Model		S-60-5	S-60-12	S-60-15	S-60-24	S-60-48
Output	DC voltage	5V	12V	15V	24V	48V
	Voltage tolerance	±2%	±1%	±1%	±1%	±1%
	Rated current	12A	5A	4A	2.5A	1.3A
	Current range	0-12A	0-5A	0-4A	0-2.5A	0-1.3A
	Rated power	60W	60W	60W	60W	62.4W
	Ripple & noise	120mVp-p	120mVp-p	150mVp-p	150mVp-p	200mVp-p
	DC adjustment range	+10, -5%	±10%	±10%	±10%	±10%
	Setup, rise, hole time	800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC
Input	Voltage range	85~264 VAC 47~63 Hz;120~370VDC
	AC current	2A/115 V 1A/ 230 V
	Efficiency	73%	76%	77%	79%	80%
	Inrush current	Cold start 30A/115VAC 60A/230VAC
	Leakage current
Protection	Over load	135%~165%
	Over load	Protection type: Fold back current limiting, recovers automatically after fault condition is removed.
	Over voltage	115%~135%
	Over voltage	Protection type: hiccup mode, recovers automatically after fault condition is removed.
Environment	Working temp. & humidity	-10°C~+60°C;20%~90 %RH
	Storage temp. & humidity	-20°C~+85°C;10%~95 %RH
	Vibration	10~500Hz,2G 10min./1cycle,period for 60min, each long X, Y, Z, axes
Safety	Withstand voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Safety	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
Standard	Safety standard	Design refer to UL1012, UL1950,TUV EN60950
Standard	EMC standard	Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
Others	Weight	0.51Kg
Others	Packing	24pcs/13.1Kg/0.7CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.